Service Notes
* Unless otherwise specified, the prices indicated below are for labor only, and do not include parts, transit costs or firearm refinishing.
* Add 10% for all machining operations involving stainless steel components.
* Most physical modifications will interrupt the firearm’s existing finish, therefore requiring surface prep-work and refinishing according to customers’ specifications. Additional charges will apply, based on the extent of the prep-work and the type of finish desired. Currently, natural stainless steel re-surfacing, manganese phosphate parkerizing and hot salt bluing are offered.
* Click on the red [O] link preceding the option to display a sample picture
* Click on the asterisk * for special notes regarding that particular option
* Add 10% for all machining operations involving stainless steel components.
* Most physical modifications will interrupt the firearm’s existing finish, therefore requiring surface prep-work and refinishing according to customers’ specifications. Additional charges will apply, based on the extent of the prep-work and the type of finish desired. Currently, natural stainless steel re-surfacing, manganese phosphate parkerizing and hot salt bluing are offered.
* Click on the red [O] link preceding the option to display a sample picture
* Click on the asterisk * for special notes regarding that particular option
Slide Modifications[O] Flatten Slide
[O] Flatten Slide & Serrate Full Length – Narrow [O] Flatten Slide & Serrate Full Length – Wide [O] Flatten Slide & Serrate Partial Length - Wide [O] Flatten Slide & Serrate Partial Length - Narrow [O] Flatten Slide & Ripple [O] Ball Cut Top of Slide [O] Lower Ejection Port [O] Flare Ejection Port [O] Fit Oversized Firing Pin Stop [O] Polish Breech Face [O] Ball Radius Cut Recoil Spring Tunnel [O] Bevel Slide [O] Serrate Rear of Slide (requires oversized firing pin stop) [O] Angle-Cut Rear of Slide & Contour to Frame * [O] Soften / Bevel Edges of Front & Rear of Slide [O] French Border (Add 10% for Stainless) [O] Machine Slide to Accept Flange Style Reverse Recoil Plug [O] Machine Slide to Accept Collar Style Reverse Recoil Plug [O] Fit Support Style Reverse Recoil Plug to Slide (Post Machining) [O] Browning Hi-Power Style Slide Scallops [O] Flush Trim & Contour Rear of Slide & Components [O] Front Cocking Serrations |
Price$95
$145 $175 $175 $145 $150 $100 $45 $40 $25 $10 $90 $50 $100 $125 $45 $75 $35 $45 $30 $95 $45 $100 |
Receiver Modifications[O] Polish 45ACP Feed Ramp
[O] Machine for Wilson/Nowlin Style Feed Ramp [O] Cut Rear Frame Tangs for Beavertail 0.220” / 0.250” Radius [O] Fit Conventional Beavertail Grip Safety & Contour Surfaces [O] Fit High Grip Beavertail Grip Safety [O] Stake-On Plunger Tube [O] Fit Single Side Thumb Safety [O] Fit Ambidextrous Thumb Safety [O] Flush Cut Slide Stop & Recess Frame [O] Checker Front Strap 20 lpi (Add 10% for Stainless) [O] Checker Front Strap 25 lpi (Add 10% for Stainless) [O] True-Up Front Strap & Ripple (+ 10% for Stainless) [O] Perform “Mini-Bob” on Pistols Equipped w/ Flat M/S HSG [O] Bobtail Frame & Contour New Configuration [O] Machine Bevel Magwell Opening on Standard Frame [O] Fit Extended Ejector |
Price
$15
$100 $50 $125 $150 $20 $45 $65 $50 $295 $325 $250 $50 $165 $50 $30 |
Accuracy - Reliability - General[O] Fit Match Barrel Bushing Only
[O] Fit Match Barrel & Bushing [O] Fit Match Bull Barrel [O] Finish Ream Chamber to Proper Depth [O] Polish Breech Face [O] Flush-Cut & Re-Crown Bushing Type Barrel [O] Flush-Cut & Re-Crown Bull Barrel [O] Throat & Polish Non-Ramped Barrel [O] Polish Barrel Feed Ramp of Ramped Style Barrel [O] Tune & Polish Extractor [O] Install Full Length Guide Rod [O] Trigger Job ~4 lb (Series 70) * [O] Competition Trigger Job ~3 lb (Series 70) * [O] Fit Match Trigger [O] Clean & Inspect Firearm [O] Labor Per Hour [O] Machine Time Per Hour [O] Written Estimates [O] Disassemble, Clean & Inspect Pistol [O] Test Fire Weapon (Does not include the cost of ammunition) |
Price$45
$150 $175 $30 $10 $45 $65 $30 $30 $25 $10 $85 $115 $20 $45 $45 $60 $35 $45 $25 |
Sights - Mounts |
Price$150
$95 $75 $65 $55 $55 |